Test Property and Test Property Sets
Customer Certificate information is based on the test plan results. Test Plans are made up of test properties and test property sets. The fields on the Test Property and Test Property Sets are described in this section.
Test Property Card
Test Properties specify essential parameters to perform testing on one hand and to verify measurements with customer specifications in the other hand.
On the Test Property Card, there are several fields that relate to the Customer Certificate.
General FastTab
On the General FastTab, the Test Method No. field indicates how the test property should be tested. For more information, see Test Methods.
Contextual Details FastTab
On the Contextual Details FastTab of the Test Property Card, the Test Property Short Text and Test Property Long Text fields provide a place to add extended text, which can be printed on the Customer Certificate. This text can be translated in the Extended Text and Extended Text 2 fields, respectively, by choosing Property > Translations on the Related menu.
Customer Certificate FastTab
The fields in this FastTab refer to how the certificate should deal with the results or measurements for the test property. The fields are separated by whether the property meets the requirements between tolerances or expected values.
| Field | Description | Meets Requirements |
|---|---|---|
| Type | Specifies if Actual Value (real measurements) or Reported Value (range of measurements) is used. | ✗ |
| Reported Value | Specifies if the value is accepted if Reported Value is selected as the Type. | ✗ |
| Out-Of-Spec. Type | Specifies what type of information should be listed in the Customer Certificate if the specification does not meet requirements. The options are Text and Value. | |
| Out-of-Spec. Text | Specifies the reason the specification does not meet requirements if Text is selected in the Out-Of-Spec. Type field. | |
| Calculation Type | Specifies the rule used to consolidate test results. The options are: - Min: Specifies lowest value of all test results for a Test Property. - Max: Specifies highest value of all test results for a Test Property. - Average: Specifies value calculated as average of all test results for a Test Property. - Standard Deviation: Specifies value calculated as standard abbreviation of all test results for a Test Property. - First Value: Specifies first value recorded for a Test Property. - Latest Value: Specifies latest value recorded for a Test Property. - Mode (Most Frequent Value): Specifies most frequently used recorded value for a Test Property. - Sum: Specifies the total of all measurements as the final value. - K.O. Criterion: Specifies that if at least one measurement is negative (for example, "not OK"), the entire test property is considered out of spec or failed. |
|
| No Print on Certificate | Determines if test properties are printed on certificates. By default, the test properties are included in the printed certificate; therefore, turning on this toggle will exclude the test properties from the printed certificate. |
Contextual Details FastTab
On the Contextual Details FastTab of the Test Property Card, the Test Property Short Text field provides a place to add extended text, which can be printed on the Customer Certificate. This text can be translated by choosing Property > Translations on the Related menu.
Test Property Sets
Test Property Sets are bundles of Test Properties. Therefore, the fields in the Test Property Card that relate to Customer Certificates are in the Lines FastTab of the Test Property Set Card.
When a Test Property is added to a Test Property Set, the information from these fields is copied to the line. Related test translations are copied to the Test Property Set line as well (accessed from the Lines FastTab by choosing Line > Translations).
On the Contextual Details FastTab of the Test Property Set Card, the Test Property Set Short Text field provides a place to add extended text, which can be printed on the Customer Certificate. This text can be translated by choosing Property Set > Translations on the Related menu.
Feedback
Submit feedback for this page .